Mã sản phẩm: ENS1750

    Mô tả: Outdoor Wireless Access Point, Dual-Band AC1750

    Xuất xứ: Taiwan

    Bảo hành: 12 tháng

Liên hệ: 079.99999.78

Chi tiết sản phẩm

Dual-Band 11ac Speeds to 1300Mbps on 5GHz; to 450Mbps on 2.4GHz
IP55-Rated Weatherproof Housing Withstands Harsh Environments
High 29dBm Transmit Power Enables Long-Range Connections
Far-Reaching Internal, High-Gain 5dBi Antennas on Both Bands
PoE-Compliant Primary Gig-Port & Secondary Pass-Through Gig-Port Offers Deployment Flexibility
Fast Roaming Secures Seamless Connections; Band Steering Optimizes Network Traffic Flow


Extend your wireless coverage to the outdoors with the high-powered ENS1750, an 802.11a/b/g/n/ac 3x3 long-range Dual Band Wireless AC1750 Outdoor Access Point with speeds up to 450 Mbps on the 2.4 GHz and 1300 Mbps on the 5 GHz frequency bands that functions as a stand-alone Access Point or as part of an EnGenius Electron Series Solution of mix-and-match business-class networking products. Configurable in a number of operation modes, this robust outdoor Access Point can support a wide variety of applications, making it ideal for small-to-medium sized companies that wish to provide outdoor access to the company network for their employees or to provide network and/or Internet connectivity via a company’s existing broadband connection.

Operating on both the 2.4 GHz and 5 GHz frequency bands and supporting 802.11a/b/g/n/ac standards, the ENS1750 features wireless speeds up to 450 Mbps on the 2.4 GHz and 1300 Mbps on the 5 GHz frequency bands and a Gigabit port for connecting to 802.3at-capable PoE Switches. The ENS1750 is built with a higher signal strength and sensitivity than other Access Points in its class allowing for fewer access points required in a deployment. These specifications assist in reducing dead zones in a deployed network. As the ENS1750 is designed to be mounted in high locations where power outlets may be scarce, it also supports PoE (Power-over-Ethernet) IEEE 802.3at with the included PoE injector or 802.3at-capable PoE Switches, drawing up to 22 Watts of power.

Technical Specifications


Standard: IEEE 802.11a/b/g/n/ac
Data Rate: Up to 450 Mbps on 2.4 GHz, up to 1300 Mbps on 5 GHz
Memory: 64MB
IEEEE 802.3at


Transmit Power
2.4 GHz: 29 dBm
5 GHz: 28 dBm
Maximum power is limited by regulatory power


Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 3x3 MIMO with 3 Streams
802.11ac with 20/40/80 MHz Channel Width
802.11n with 20/40 MHz Channel Width
802.11a/b/g with 20 MHz Channel Width

Supported Modulation Types
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.1ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Supported Data Rates (Mbps): 
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~450 Mbps (MCS0 to MCS15)
802.11ac: 6.5~1300 Mbps (MCS0 to MCS9, NSS= 1 to 3)


Power Source
802.3at Compliant Source
Active Ethernet (Power over Ethernet, PoE) 

Antenna Array
Internal 5 dBi Dual Concurrent Omni Antenna
Polarization: Linear
Azimuth Beam-Width: 360°
Elevation Beam-Width: 2.4 Ghz: 45°, 5 GHz: 40°


LED Indicator
WLAN (2.4GHz)

Physical Interface
2x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) – BASE-T Ports
LAN1: Supports 802.3at PoE Input
LAN2: Data Pass Through
Reset Button
Power Connector




Operation Modes
Access Point, WDS


WDS Detail
WDS Bridge




WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Supplicant (Client Bridge Mode)
Hide SSID in beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List


QoS (Quality of Service)
Complaint with IEEE 802.11e Standard

Wireless / Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
Band Steering
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through, VLAN Pass-through over WDS Bridge Mode
Wi-Fi Scheduling
BSSID Support
Supports 16 SSIDs (8 SSIDs per band)
Save Configuration as Default
Client Traffic Status
Guest Network
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Reset & Backup:  Reset to factory default. User can export all setting into a file via Web
RADIUS Accounting


Control Features
CLI Support
Distance Control (Ack timeout)
Multicast Supported
Wi-Fi Scheduler/Auto Reboot
Fast Roaming
Fast Handover
SNMP v1/v2c/v3
MIB I/II, Private MIB
Email Alerts