EWS310AP

EWS310AP


    Mã sản phẩm: EWS310AP

    Mô tả: Neutron Series Dual band Wireless N600 Managed Indoor Access Point

    Xuất xứ: Taiwan

    Bảo hành: 12 tháng


Liên hệ: 079.99999.78


Chi tiết sản phẩm

Supports IEEE 802.11a/b/g/n standards with up to 300 Mbps on each band
 
Up to 29 dBm high RF power on 2.4 GHz. Up to 26 dBM on 5 GHz for enhanced wireless coverage
 
Dynamic Channel Optimization
 
Fast Roaming when used with a RADIUS server
 
4 internal MIMO antennas/Dual band. Designed for ceiling or desktop deployments
 
Band Steering shifts Dual band clients to 5 GHz for better throughput performance

The Dual Band (up to 300 + 300 Mbps) Ceiling Mount EWS310AP can operate as a stand-alone Access Point connecting to third-party PoE-capable (IEEE 802.3at/af) Switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management Solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Controller/Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS310APs from Neutron Series Controller/Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

Technical Specifications

 

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 16MB
Peak Power: Up to 15.6W

 

Antenna Array
Four (4) Internal 5 dBi Omni-Directional Antennas RF: 2.4 and 5 GHz Frequency Bands

 

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector

 

Power Requirements 
Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A

 

Modulations 
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

 

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

 

Software

 

Operation Modes 
Access Point, Mesh AP (available soon)

 

Multiple BSSID 
Supports up to 8 BSSIDs per radio

 

LAN
IP (check validity and DHCP server IP range) MAC

 

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

 

Spanning Tree
Supports 802.1d Spanning Tree Protocol

 

Wireless 
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)

 

Transmission Rate 
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

 

Wireless Management Features (with a Neutron Series Switch)
Access Point Auto Discovery and Provisioning 
Access Point Auto IP Assignment 
Access Point Cluster Management 
Remote Access Point Rebooting 
Access Point Device Name Editing 
Access Point Radio Settings
Band Steering 
Traffic Shaping
Fast Handover 
Seamless Roaming (requires RADIUS server)
Access Point Client Limiting 
Mesh Network* 
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK) 
VLANs for Access Point- Multiple SSIDs 
Guest Network 
Access Point Status Monitoring 
Wireless Client Monitoring 
Wireless Traffic & Usage Statistics 
Visual Topology View 
Floor Plan View 
Map View 
Secure Control Messaging 
SSL Certificate 
Local MAC Address Database 
Remote MAC Address Database (RADIUS) 
Unified Configuration Import / Export 
Bulk Firmware Upgrade Capability 
Intelligent Diagnostics

 

* Mesh networking mode available soon as a free firmware upgrade

 

** User capacity performance results may vary based on topology configuration, structural and architectural elements, environmental factors, type of data traffic, RF capabilities of client devices, distance, RF interference in the operating environment and other factors.