The IG-642POE is an Industrial 6-port full Gigabit Ethernet Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port Gigabit RJ-45 copper and 2 100/1000Base-X SFP fiber optic interfaces delivered in an IP31 rugged strong case with redundant power system. The IG-642POE is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments such as the factory or public transportation.

Model	IG-642POE
Standard	IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/100BASE-FX IEEE802.3z Gigabit SX/LX IEE802.3ab Gigabit 1000T IEEE802.3x Flow Control and Back pressure IEEE802.3af for POE IEEE802.3at for POE+
Interface	4 x 10/100/1000Mbps RJ45 2 x mini GBIC
PoE Port	4
Switch Architecture	Store and forward switch architecture Back-plane up to 12Gbps
MAC Address	1K
Jumbo Frames	Up To 9KB
Packet Buffer	1M bit
LED	PW1   - Power 1 Green PW2   - Power 2 Green Err   - Power Fail : Amber TX/RJ45 Port:   - LNK: Green   - SPD: 10/100 (off), 1000 (Green) SFP   - Link : Green   - Active: Flash
DIP Switch	DIP 1: Port 5   - OFF: SFP port 5 Enable (DEFAULT)   - ON: SFP Port 5 disable DIP2   - OFF: SFP 1000M (DEFAULT)   - ON: SFP 100M
Removable Terminal Block	Provide 2 Redundant power , Alarm relay contact ,6 Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm
Power Supply	Redundant Dual DC 44V-55V Power Input
Alarm Relay	Relay outputs with current carrying capacity of 1 A @24VDC Relay in short circuit mode when 2 powers are connected. In open circuit mode when only one power supply is connected
PoE Power	Support 802.3at/af Maximum 36Watts per port Total power 126Watts
Power Consumption	Max. 5.76W (excluding PoE)
Dimensions	142mmx36.2mmx105mm (LxWxD)
Operating Temerature	-40℃ to 70 ℃
Storage Temerature	-40℃ to 85 ℃
Installation mounting	DIN Rail mounting and Wall Mounting
Certificates:	EN55022/24 EN50155 EN55011 EN50121-3-2 EN50121-4 EN 50155 / EN 60068-2-6 EN 50155 / EN 60068-2-27 EN 50155 / EN 60068-2-32