Hỗ trợ khách hàng

Kinh doanh dự án

Mr Hiếu: 079 9999 978

Email: [email protected]

Kinh doanh bán lẻ

Mr. Quốc: 0968 02 7878

Email: [email protected]

SNMP-GSH2004L

SNMP-GSH2004L


    MÃ SẢN PHẨM: SNMP-GSH2004L
    XUẤT XỨ: TAIWAN
    BẢO HÀNH: 24 THÁNG


Liên hệ: 079 9999 978


Chi tiết sản phẩm

SNMP-GSH2004L

24 Port Gigabit with 4 UTP/SFP combo Web Smart Switch

 
Feature Summary
    • 24 port 10/100/1000Mbps including 4 port UTP/SFP combo ports
    • Built-In Power Supply 802.1Q Tag-based VLAN, Port-based VLAN, IGMP Snooping
    • Web smart features provide easier manageability, security, QoS, and performance
    • Supports SNMPv1/v2c, trap for management
    • Supports broadcast storm filtering
    • Supports (IEEE802.3az EEE Energy Efficient Ethernet standard) for green Ethernet application
the SNMP-GSH2004L is a 24-port Gigabit SNMP Web smart Switch with 20 10/100/1000Base-T ports and 4 x 10/100/1000Base-T or 100M/1000MSFP combo ports. This Switch can be used to build high-performance switched workgroup networks. The switch can be managed through Ethernet port using Web-based management unit, associated with SNMP agent. In addition, the switch features comprehensive and useful functions such as VLAN, Trunk/Aggregation, QoS , RSTP, IGMP Snooping, SNMP, Loop Detection, Broadcast Strom via the intelligent software. It is suitable for both metro- LAN and office applications.
QoS with four priority queues
The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (QoS) support for real time applications based on information taken from Layer 2 to Layer 4, such as VoIP
Support 802.1d Spanning Tree and 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.
Broadcast/Multicast/unknown- unicast Storm Control
To limit too many broadcast/multicast//unknown- unicast flooding in the network, these storm control functions is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.