As part of the Electron Series Solution expansive line of mix-and-match business-class networking products, the EAP1200H is a Ceiling Mount AC1200 Dual Band Wireless Indoor APs that enable a cost effective and reliable way to quickly setup a new network or expand a company’s network user capacity and extend it throughout a building. Each EAP1200H Access Point can be easily accessed through any standard web browser and can be easily and quickly configured and administered without special training.

The EAP1200H leverages the breakthrough speed and performance 802.11ac for connecting to laptops and other devices that need to wirelessly stream HD video or transfer large files. This high-powered 802.11ac 2x2 ceiling mount Dual Band Access Point features speeds up to 300 Mbps on 2.4 GHz, and up to 866 Mbps on the 5 GHz band when associated with AC client devices. It can be configured as an Access Point, Client Bridge, or WDS (AP & Bridge) and features a high transmit RF power of 26 dBm transmit RF power on both 2.4 and 5 GHz frequency bands for long range connectivity. The EAP1200H includes a Gigabit Ethernet port for connecting to 802.3at-capable PoE Switches and an enhanced receive sensitivity MIMO (Multiple In / Multiple Out) integrated sectorized 3D antenna array. It’s an ideal solution for spacious interior environments such as large homes, startups, small and medium-sized businesses, multiple-floor buildings, hotels, hospitals, and other venues wishing to expand their network.

Technical Specifications

Standard
IEEE 802.11a/n/ac on 5 GHz
IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.3at

Antenna
(4) Integrated 3D Sectorized Antenna Array
(2) Internal 5 dBi on 2.4 GHz
(2) Internal 5 dBi on 5 GHz

Physical Interface
1 x 10.100/1000 Gigabit Ethernet Port with PoE support
1 x Reset Button
1 x Power Connector

Physical Security
1 x Kensington Security Slot

LED Indicators
1 x Power
1 x LAN
1 x 2.4 GHz
1 x 5 GHz
1 x WPS

LED Control
On/Off

Power Source
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
DC Input: 12VDC/2A
PoE: Compatible with 802.3at

Memory Capacity
16 MB Flash
128 MB SDRAM

Wireless & Radio Specifications
Dual Band, Dual Concurrent Radio

Operation Modes
Access Point
WDS Bridge
WDS Access Point

Transmit Power (combined)
2.4 GHz up to 26 dBm
5 GHz up to 26 dBm

Radio Chains/Spatial Streams
2 x 2: 2

Supported Data Rates (Mbps)
2.4 GHz: Max 300
5 GHz: Max 866
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 866 (MCS0 to MCS9, NSS=1 to 2)

Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

Channelization
802.11ac with 20/40/80 MHz channel width
802.11n with 20/40 MHz channel width
802.11a/b/g with 20 MHz channel width

Supported Modulation
802.11b: BPSK, QPSK, 16-QAM, 64-QAM
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ac: BPSK, QPSK, 16-QAM, 256-QAM

Management
Auto Channel Selection
Multiple SSID: 16 SSIDs, 8 SSIDs per Radio
SNMP V1/V2c/V3
MIB I/II, Private MIB
VLAN Tag/VLAN Pass-through
Wireless Clients List
Guest Network
Fast Roaming
Fast Handover
Client Limit
RADIUS Accounting
Mobility: PMKSA for Fast Roaming
Firmware Upgrade: Web UI/CLI
Backup/Restore
Save Configuration as Default
Auto Reboot
Email Alert