The EAP1750H leverages the breakthrough speed and expanded user capacities of 11ac. This Dual-Band Access Point offers speeds to 450 Mbps on 2.4 GHz and up to 1300 Mbps over the 5 GHz band. Band Steering automatically shifts Dual-Band-capable clients to the less-congested 5 GHz band optimizing network bandwidth. It is designed to operate in a variety of indoor settings and supports today’s most demanding applications.

With an award winning, low profile design, the AP blends nicely with interior décor making it perfect for style-conscious settings like homes, studios, and high-end offices. Deploy and power the AP nearly anywhere with 802.3at PoE support, and easily power it from an 802.3at-capable switch or injector. Configure the device as an Access Point or WDS (AP & Bridge) for customized deployment scenarios.

The AP features high RF transmit power of 28 dBm and high receive sensitivity on both bands for improved indoor wireless coverage range and multi-floor penetration. Its integrated 3D sectorized, 5dBi, Omni-directional antenna array minimizes interference ensuring extensive, reliable connections.

Technical Specifications

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz; IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 1300 Mbps in 5 GHz; Up to 450 Mbps in 2.4 GHz
Memory: 128MB
Flash Memory: 16MB
Power Consumption: Up to 22W

Antenna Array
Integrated 3D Sectorized Antenna Array
4 dBi on 2.4 GHz
5 dBi on 5 GHz

Physical Interface
1 x RJ-45 Gigabit Ethernet Port (10/100/1000 Mbps)
1 x Reset Button
1 x Power Connector

LED Indicators
Power
WPS
2.4 GHz
5 GHz
LAN

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3at)
Power Adapter: 12V/2A

Modulations
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, WDS Bridge, WDS Access Point

Multiple BSSID
Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11a/11b/11g/11n/11ac
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only, 11ac only

QoS
WMM (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only