With Dual-Band, 11n concurrent speeds to 300 Mbps over each band, the EAP600 is a network workhorse that utilizes Band Steering to automatically detect and shift Dual-Band-capable clients to the less-congested 5 GHz band, optimizing network bandwidth. It is designed to operate in a variety of indoor settings and supports today’s demanding applications.

With an award winning, low profile design, the AP blends nicely with interior décor making it perfect for style-conscious settings like homes, studios, and high-end offices. Deploy and power the AP nearly anywhere with 802.3at PoE support, and easily power it from an 802.3at-capable switch or injector. Configure the device as an Access Point or WDS (AP & Bridge) for customized deployment scenarios.

The AP features high RF transmit power of 29 dBm and high receive sensitivity on both bands for improved indoor wireless coverage range and multi-floor penetration. Its wide extending, integrated 3D sectorized, 5dBi, Omni-directional antenna array minimizes interference ensuring extensive, reliable connections.

Technical Specifications

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 8MB
Power: Consumption: Up to 16W

Antenna
Four (4) Internal 5 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
1 x Reset Button
Power Jack

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A

Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

Receiver Sensitivity
802.11n (5 GHz)
-94dBm @ MCS0
-76dBm @ MCS7
-91dBm @ MCS8
-73dBm @ MCS15

802.11n (2.4 GHz)
-95dBm @ MCS0
-77dBm @ MCS7
-91dBm @ MCS8
-75dBm @ MCS15

802.11a (5 GHz)
-95dBm @ 6Mbps
-80dBm @ 54Mbps

802.11b (2.4 GHz)
-95dBm @ 1Mbps
-91dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm @ MCS0~2/MCS8~10
26dBm @ MCS3/MCS11
25dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS6/MCS14
21dBm @ MCS7/MCS15
802.11n (2.4 GHz)
27dBm @ MCS0~2/MCS8~10
27dBm @ MCS3/MCS11
26dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS6/MCS14
23dBm @ MCS7/MCS15
802.11a (5 GHz)
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
21dBm @ 54Mbps
802.11b (2.4 GHz)
7dBm @ 1~11Mbps

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, WDS Bridge, WDS Access Point, Universal Repeater

Multiple BSSID
Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

QoS
WMM (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only