When set to Client Bridge mode, Ethernet-enabled devices such as printers and copiers can join a business’s existing wireless network when they are connected to the ECB1750’s Gigabit Ethernet port, making applications like printing from wireless laptops or tablets even easier. In WDS mode, the ECB1750 enables a company’s wireless network to be expanded without a wired connection between devices.

The ECB1750 connects to AC compatible computers and other devices (up to 1300 Mbps) exceeding wired Gigabit speeds and nearly 3x faster than Wireless N. The ECB1750’s Gigabit Ethernet port also offers greater bandwidth capacity and faster data transfers through the network. This means that bandwidth sensitive applications such as video and VoIP (Voice over IP) perform with improved quality and a minimum of packet loss.

The ECB1750 supports wireless encryption standards such as Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) Encryption, IEEE 802.1X with RADIUS. MAC Address Filtering is also included allowing network administrators to allow or deny network access to client devices (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses.

EZ Controller™ software for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks. Available as a free download.

Technical Specifications

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz; IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24, 5.26-5.32, 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 450 Mbps on 2.4 GHz and up to 1300 Mbps on 5 Ghz
Memory: 128MB
Flash Memory: 16MB
Peak Power: Up to 22W

Antenna Array
Six (6) External 5 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) Port with PoE Support
1 x Reset Button
Power Jack

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A

Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

Receiver Sensitivity
802.11n (5 GHz)
-94dBm @ MCS0
-76dBm @ MCS7
-91dBm @ MCS8
-73dBm @ MCS15
802.11n (2.4 GHz)
-95dBm @ MCS0
-77dBm @ MCS7
-91dBm @ MCS8
-75dBm @ MCS15
802.11a (5 GHz)
-95dBm @ 6Mbps
-80dBm @ 54Mbps
802.11b (2.4 GHz)
-95dBm @ 1Mbps
-91dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm @ MCS0~2/MCS8~10
26dBm @ MCS3/MCS11
25dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS6/MCS14
21dBm @ MCS7/MCS15
802.11n (2.4 GHz)
27dBm @ MCS0~2/MCS8~10
27dBm @ MCS3/MCS11
26dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS6/MCS14
23dBm @ MCS7/MCS15
802.11a (5 GHz)
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
21dBm @ 54Mbps
802.11b (2.4 GHz)
7dBm @ 1~11Mbps

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point. Client Bridge. WDS Access Point. WDS Station. WDS Bridge

Multiple BSSID
Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

QoS
WMM  (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only