The ENH900EXT is a high-powered, long-range, 3x3 Dual-Band Wireless 802.11a/b/g/n Outdoor Access Point with speeds up to 450 Mbps on both its high-powered 2.4 GHz and 5 GHz radios. It can be configured as an Access Point, or WDS (AP, Station, & Bridge). The ENH900EXT is designed to operate in a variety of outdoor environments making its high-powered, long-range characteristics a cost-effective alternative to ordinary Access Points that don’t have the range and reach to connect to a growing number of wireless users who wish to connect to a business network. The ENH900EXT is easy to install in virtually any location with its included PoE (Power over Ethernet) injector for quick outdoor installation.

Technical Specifications

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 450 Mbps on both frequency bands
Memory: 256MB
Flash Memory: 16MB
Power Consumption: Up to 34W

Antenna Array
Six (6) External N-type omni-directional antennas
Three (3) x 5 dBi omni-directional antennas for 2.4 GHz
Three (3) x 7 dBi omni-directional antennas for 5 GHz

Physical Interface
LAN 1: RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE Capable 802.3at (input)
LAN 2: RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE Capable 802.3af (output)
Both Gigabit Ethernet ports support Surge Protection up to 1.5KV
1 x Reset Button on PoE Injector
1 x Power Connector

LED Indicators
Power
LAN 1
LAN 2
2.4 GHz
5 GHz

Power Requirements
External Power Adapter on PoE Injector (EPE-48GR), DC IN 48 V/0.8A

Modulation Technology
IEEE 802.11b: BPSK, QPSK, CCK
IEEE 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

Management

Operation Modes
Access Point, WDS

WDS Detail
WDS AP
WDS Bridge
WDS Station

Multiple BSSID
Supports up to 16 SSIDs; 8 SSIDs per radio
BSSID Support

LAN
IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging / Pass through
Independent VLAN Settings can be enabled or disabled
Any packet without a VLAN tag will be inserted with a PVID (Ethernet Port VID)
Client Traffic Status

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 802.11a/b/g/n
Channel selection (settings vary by country)
Auto Channel Selection
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

QoS
Compliant with IEEE 802.11e Standard

SNMP
v1, v2c, v3

MIB
I/II, Private MIB

Other Management Features
Client Statistics
Save Configuration as User Default
Fast Roaming
Email Alerts
RADIUS Accounting
Guest Network

Control Features
CLI Supported
Distance Control (Ack Timeout)
802.1X Supplicant (Client Bridge mode)
Multicast
Auto Reboot
Obey Regulatory Power

Security
WEP Encryption (64, 128, 152 bit)
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)
Hide SSID in beacons
MAC Address Filtering - up to 50 Addresses
Wireless STA (Client) Connection List
Https Support
SSH Support