Extend your wireless coverage to the outdoors with the high-powered ENS1200, an 802.11a/b/g/n/ac 2x2 long-range Dual Band Wireless AC1200 Outdoor Access Point with speeds up to 300 Mbps on the 2.4 GHz and 866 Mbps on the 5 GHz frequency bands that functions as a stand-alone Access Point or as part of an EnGenius Electron Series Solution of mix-and-match business-class networking products. Configurable in a number of operation modes, the ENS1200 can support a wide variety of applications, making it ideal for small-to-medium sized companies that wish to provide outdoor access to the company network for their employees or to provide network and/or Internet connectivity via a company’s existing broadband connection.

Operating on both the 2.4 GHz and 5 GHz frequency bands and supporting 802.11a/b/g/n/ac standards, the ENS1200 features wireless speeds up to 300 Mbps on the 2.4 GHz and 866 Mbps on the 5 GHz frequency bands and a Gigabit port for connecting to 802.3at-capable PoE Switches. The ENS1200 is built with a higher signal strength and sensitivity than other Access Points in its class allowing for fewer access points required in a deployment. These specifications assist in reducing dead zones in a deployed WLAN and help boost received signal quality on both ends of the AP as well as client devices in the network.

In addition, the ENS1200’s internal MIMO antenna array is comprised of two (2) internal 5 dBi omni-directional high-gain antennas for 2.4 GHz and two (2) internal 5 dBi omni-directional high-gain antennas for 5 Ghz . This combination of high transmit power and enhanced receive sensitivity results in long range connectivity to client devices and in some venues can minimize the number of Access Points necessary for a deployment.

Technical Specifications

Hardware
Standard: IEEE 802.11a/b/g/n/ac
Data Rate: Up to 300 Mbps on 2.4 GHz, up to 866 Mbps on 5 GHz
IEEEE 802.3at

Transmit Power
2.4 GHz: 27 dBm
5 GHz: 26 dBm
Maximum power is limited by regulatory power

Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x MIMO with 2 Streams
802.11ac with 20/40/80 MHz Channel Width
802.11n with 20/40 MHz Channel Width
802.11a/b/g with 20 MHz Channel Width

Supported Modulation Types
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.1ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Supported Data Rates (Mbps): 
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 Mbps (MCS0 to MCS15)
802.11ac: 6.5~866 Mbps (MCS0 to MCS9, NSS= 1 to 3)

Power Source
802.3at Compliant Source
Active Ethernet (Power over Ethernet, PoE) 

Antenna Array
Internal 5 dBi Dual Concurrent Omni Antenna
Polarization: Linear
Azimuth Beam-Width: 360°
Elevation Beam-Width: 2.4 Ghz: 45°, 5 GHz: 40°

LED Indicator
Power
WLAN (2.4GHz)
WLAN (5GHz)
LAN1
LAN2

Physical Interface
2 x RJ-45 Fast Ethernet (10/100/1000 Mbps)
1 x Reset Button

Power Requirements
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A

Software

Operation Modes
Access Point, WDS

WDS Detail
WDS AP
WDS Bridge

Management

Security
WEP Encryption 64/128/152 bit
WPA/WPA2 AES/TKIP (WPA-EAP using TKIP)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Supplicant (Client Bridge Mode)
Hide SSID in beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
Https
SSH

QoS (Quality of Service)
Complaint with IEEE 802.11e Standard

Wireless / Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
Band Steering
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through, VLAN Pass-through over WDS Bridge Mode
Wi-Fi Scheduling
SSIDs
BSSID Support
Supports 16 SSIDs (8 SSIDs per band)
Save Configuration as Default
Client Traffic Status
Guest Network
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Reset & Backup:  Reset to factory default. User can export all setting into a file via Web
RADIUS Accounting

Control Features
CLI Support
Distance Control (Ack timeout)
Multicast Supported
Wi-Fi Scheduler/Auto Reboot
Fast Roaming
Fast Handover
SNMP v1/v2c/v3
MIB I/II, Private MIB
Email Alerts