The ENS500 is a high-speed, long-range outdoor 802.11n Wireless N300 Client Bridge and Access Point that operates in the 5GHz frequency band so it avoids the congested wireless traffic from devices on the more commonly used 2.4 GHz frequency band. This makes the ENS500 an ideal solution for building-to-building wireless bridging, for stable streaming of video from connected IP security cameras in parking lots or garages back to a company network, or for sending data to outdoor digital signage. The ENS500 can also be used in other operational modes including as an Access Point to offer wireless network connectivity to a more defined outdoor venue rather than a more general outdoor area around it.

Technical Specifications

Hardware
RF: 5 GHz Frequency Band (5.18 to 5.825 GHz)
Standard: IEEE 802.11a/n
Data Rate: Up to 300 Mbps
Memory: 64MB
Flash Memory: 16MB
Power Consumption: Up to 6.9W

Antenna
Internal 10 dBi directional antenna with Dual Polarization

Physical Interface
2 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button

Power Requirements
Active Ethernet (Power-over-Ethernet)
Proprietary PoE Design
Power Adapter (United States) 24V/0.6A

Software

Operation Modes
Access Point, Client Bridge, Client Router, WDS

WDS Detail
WDS AP
WDS Bridge

Management

Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)
Hide SSID in beacons
MAC Address Filtering, Up to 50 Fields
Wireless STA (Client) Connection List

QoS (Quality of Service)
WMM (Wireless Multimedia)

Wireless / Network
Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through
Auto Reboot
Wi-Fi Scheduling