EnStationAC is a 5 GHz High-Powered, Long-Distance 11AC Wireless Outdoor AP/Client Bridge offering dual-PoE Gigabit ports and a high-gain directional antenna that emits a narrow signal beam, limiting interference and ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over extremely long distances, extending the network up to 5 miles point-to-point.

Optimal Bandwidth for Fast File Transfers & Smooth HD Video Streaming
EnStationAC’s powerful independent RF interface offers high-bandwidth and speeds on its dedicated 5 GHz frequency band. This allows EnStationAC to accommodate 4k Ultra High Definition (UHD) video and heavy multi-application traffic services, extending bandwidth over a wider channel range (20MHz, 40MHz and/or 80MHz) allowing network managers to fine tune channel usage based on the application.

Connect & Power A Second Network Device for Greater Deployment Flexibility
Offering greater flexibility in deployment, the EnStationAC features two PoE 802.3at-compliant Gigabit ports. Connect and power a device, such as a remote IP surveillance camera or AP, for greater deployment flexibility. Deploy both devices where power outlets are scarce or unavailable, such as under the eaves of roofs, high atop light poles or in other remote locations.

Tethering a series of 2MP or 5MP IP surveillance cameras to the EnStationAC’s secondary port gives you “eyes on” places you might not otherwise see – no matter how far away, with significantly better results than traditional, non-tethered wireless surveillance setups.

Going The Distance
EnStationAC features 26 dBm output power and high receive sensitivity, coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver stable robust connectivity, optimal bandwidth and high-speed data rates of 867 Mbps over extremely long distances — up to 5 miles in clear line-of-sight point-to-point deployments.

Technical Specifications

Standard
IEEE 802.11a/n/ac

Internal Antennas
(1) 19 dBi 5 GHz High-Gain Directional

Physical Interface
(1) 10/100/1000 Mbps Port Supports 802.3at/af Proprietary 48V~ 54V PoE Input
(1) 10/100/1000 Mbps Port Supports 802.3af/PSE Output

LED Indicators
1 x Power
1 x LAN 1
1 x LAN 2
1 x WLAN

Reset Button

Power
Power Source (PoE Adapter):
802.3at/~54V Proprietary Compliant Source
Active Ethernet (Power-over-Ethernet, PoE)

Power Consumption
23.4W


Wireless & Radio Specifications

Operating Frequency
5 GHz

Operation Modes
Access Point
Client Bridge
WDS modes

Transmit Power
Up to 26 dBm
Up to 400 mW
Max Power is limited by regulatory power

Radio I
11a/n/ac: 5.180-5.825 GHz

Radio Chains/Spatial Streams
2x2:2 MIMO

Supported Data Rates (Mbps)
5 GHz: Max 867 Mbps
802.11a: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9)

Supported Radio Technologies
802.11a/n/ac: Orthological Frequency-Division Multiplexing (OFDM)

Channelization
802.11ac with 20/40/80 MHz Channel Width
802.11n with 20/40 MHz Channel Width
802.11a with 20 MHz Channel Width

Supported Modulation
802.11a/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, OFDM & 256-QAM

5 GHz (Port 1)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 30°
Elevation Beam-Width: 18°
VSWR: 1:2.0

5 GHz (Port 2)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 18°
Elevation Beam-Width: 30°
VSWR: 1:2.0